Powder coat finishes
Architectural RAL colors for modern and classic projects.
Aluminum Pivot Door
Aluminum Pivot Door manufacturer & supplier from China — custom aluminum systems for villa, multi-unit and commercial export projects.
See the Aluminum Pivot Door in Action: Performance Showcase
Profile depth, sealing paths and hardware geometry selected for smooth operation and long-term durability on export projects.
- Made-to-order sizes
- Floor & head pivot set
- Oversized leaf capability
- No hinge-side clearance
- Floor reinforcement detail
- Export packing & QC
Aluminum Pivot Door from Aoslon is a custom aluminum pivot entrance door hung on a floor and head pivot set, allowing an oversized heavy leaf to swing clear of the frame Share openings, glass preference, finish and destination port for a drawing-based proposal.
Manufactured in China with process control from profile processing to final inspection, packing and documents for overseas buyers, dealers and project contractors.
Customization Options for Aoslon Aluminum Pivot Door
Configure finishes, glass, layouts and hardware for your market — then request a custom quote.
Anodized options
Durable metallic finishes for coastal and urban markets.
Configurations
Single pivot leaves, offset pivots and glazed or panelled builds on drawings.
Glass packages
Double/triple IGU, Low-E and safety glass matched to codes.
Key Features of Aluminum Pivot Door
Engineering details buyers evaluate when specifying aluminum pivot door.
Pivot-set operation
The leaf rotates on a floor and head pivot rather than a hinge line at the frame edge.
Oversized leaf capability
Very wide and tall leaves become practicable because the pivot carries the weight centrally.
Clear architectural swing
With the pivot set inboard, the leaf can sweep past the reveal without a hinge-side gap.
Floor reinforcement detail
Pivot base, floor build-up and reinforcement are agreed before the slab is finished.
Weight-matched pivot duty
Pivot set selected against the leaf weight and the expected cycle count.
Export manufacturing
Factory QC, labeling and crates designed for overseas freight.
Aluminum Pivot Door Performance Specifications
Typical engineering ranges for project discussions — final values follow drawings, glass and destination codes.
| Parameter | Typical range |
|---|---|
| Frame / track depth | Series-dependent (project sized) |
| Panel glass range | ≈ 6–12 mm mono or IGU packages |
| Max panel guidance | Share drawings for width/height limits |
| Thermal break | Available on insulated door series |
| Operation | Sliding / hinged / lift-slide / multi-panel |
| Sealing path | Brush + weather seals; project rating on request |
| Finish | Powder coat / anodized |
| Hardware duty | Residential to light commercial |
| Lead time (typical) | Quoted per qty / finish / glass (often 25–45 days after deposit & drawing freeze) |
| MOQ guidance | Discuss for dealers & project lots |
Figures are typical engineering ranges for common configurations. Final air/water/wind, U-value and size limits depend on profile series, glass makeup, hardware and destination codes. Confirm on drawings with Aoslon engineering before submittal.
Aluminum Pivot Door — Technical Overview
Product details, features, styles, hardware and specifications for Aoslon aluminum door systems.
Product Details
- Made-to-order sizes
- Floor & head pivot set
- Oversized leaf capability
- No hinge-side clearance
- Floor reinforcement detail
- Export packing & QC
Aluminum Pivot Door from Aoslon is a custom aluminum pivot entrance door hung on a floor and head pivot set, allowing an oversized heavy leaf to swing clear of the frame Share openings, glass preference, finish and destination port for a drawing-based proposal.
Manufactured in China with process control from profile processing to final inspection, packing and documents for overseas buyers, dealers and project contractors.
Product Features
Pivot-set operation
The leaf rotates on a floor and head pivot rather than a hinge line at the frame edge.
Oversized leaf capability
Very wide and tall leaves become practicable because the pivot carries the weight centrally.
Clear architectural swing
With the pivot set inboard, the leaf can sweep past the reveal without a hinge-side gap.
Floor reinforcement detail
Pivot base, floor build-up and reinforcement are agreed before the slab is finished.
Weight-matched pivot duty
Pivot set selected against the leaf weight and the expected cycle count.
Export manufacturing
Factory QC, labeling and crates designed for overseas freight.
Customizable Styles
Powder coat finishes
Architectural RAL colors for modern and classic projects.
Anodized options
Durable metallic finishes for coastal and urban markets.
Configurations
Single pivot leaves, offset pivots and glazed or panelled builds on drawings.
Glass packages
Double/triple IGU, Low-E and safety glass matched to codes.
Hardware Accessories
Handles & locks
Finish options in matte black, brushed or matching profiles.
Locking packages
Locking and concealed lock provision specified for the pivot leaf arrangement.
Rollers / hinges
Pivot set duty matched to leaf weight and cycle count.
Project hardware sets
Packages aligned to residential or light commercial duty.
Basic Parameters
| System type | Aluminum Pivot Door |
|---|---|
| Frame material | Thermal-break aluminum (project option) |
| Typical finish | Powder coat / anodized |
| Glazing | Single / double / triple IGU — Low-E & laminated on request |
| Opening types | Floor-pivot single leaf |
| Applications | Residential and commercial entrances |
| Customization | Made to drawings and rough openings |
| Supply model | Factory direct · Dealer · Project lots |
Product Specifications
| Profile series | Confirm with Aoslon engineering for leaf weight and loads |
|---|---|
| Visible frame width | Slim / standard options — project-dependent |
| Max size guidance | Share drawings for leaf weight and pivot duty check |
| Pivot offset | Set to the drawing — affects the swing path |
| Floor reinforcement | Agreed with the slab build-up before finishing |
| Hardware duty | Matched to leaf weight (confirm cycles) |
| Air / water / wind | Designed to project performance targets |
| Packing | Export crates, corner protection, labeled units |
| Lead time | Quoted per quantity, finish and glass |
| MOQ | Discuss for dealers and multi-unit projects |
Application Scenarios for Aluminum Pivot Door
Villa, residential multi-unit, commercial and interior openings.
Villa Patio & Entry Doors
Multi-Unit Entry Systems
Commercial Entrance & Openings
Interior Living Opening
Aoslon AdvantageBuilt for export projects
30+Years manufacturing focus
Our strengths
Why Choose Aoslon for Your Aluminum Pivot Door?
A manufacturing partner built for export projects and long-term supply.
Factory Direct
Work with a China manufacturer focused on custom aluminum openings.
Project Support
Drawing review, series selection and documentation for B2B buyers.
Consistent Quality
Process control from profile processing to final inspection.
Partner Friendly
Suitable for dealers, builders and commercial contractors.
Export Ready
Crating, labeling and documents for overseas freight.
Custom Engineering
Sizes, glass and hardware matched to your drawings.
How we work
Custom Door Manufacturing Process
From requirements to export packing — clear steps for B2B buyers.
- 01Requirements
Sizes, drawings, performance targets.
02Effect & OptionsSeries, glass, finish proposals.
03Quote & ConfirmPricing, MOQ and lead time.
- 04Production
Profile, machine, assemble, finish.
- 05QC & Testing
Inspection before release.
- 06Pack & Ship
Export crates and documents.
Transparent milestones for B2B buyers — from drawings to export packing.
Start Your ProjectReady to Specify Aluminum Pivot Door?
Tell us about openings, destination and quantity — we will recommend glass, finish and hardware options.
Frequently Asked Questions About Aluminum Pivot Door
What is Aluminum Pivot Door?
Aluminum Pivot Door from Aoslon is a custom aluminum door system manufactured to project sizes. Share openings, glass preference and destination for a tailored proposal.
Can you customize sizes and finishes?
Yes. Most systems are made to drawings with powder-coat or anodized finish options. Confirm color and hardware when requesting a quote.
What do you need for a quotation?
Rough openings or shop drawings, glass type, destination country/port, quantity and target lead time. Upload PDF/DWG/DXF on the form.
What is your MOQ?
MOQ depends on series, finish and whether the order is a dealer stock lot or a project lot. Sample and pilot quantities can be discussed for qualified buyers. Share target SKUs and destination for guidance.
What lead times should we plan?
Typical production after deposit and drawing freeze is often in the 25–45 day range for common finishes and glass, longer for complex glass, special colors or peak season. We confirm lead time on each quotation.
Which Incoterms do you support?
Common terms include FOB Chinese ports and CIF/CFR to destination ports when logistics are arranged with us. EXW is available for buyers with their own forwarder. Confirm preferred terms on the RFQ.
Do you support dealers and contractors?
Yes. We supply distributors, builders and commercial buyers with export packing and technical documents. See Become a Dealer for partner support.
Are samples available?
Samples can be arranged for qualified inquiries. Mention sample needs in the quote form.
Our Aluminum Pivot Door Collection
Related aluminum door configurations often specified on the same project.
Get a free quote
Request a Consultation
Share project details for Aluminum Pivot Door — sizes, glass, finish and destination. Our export team will respond with options.
Custom sizesGlass & finishHardware packagesOEM / DealerExport packing
- Drawings welcomePDF / DWG / DXF upload on the form
- Export-ready replySeries, lead time and packing notes
- B2B focusedDealers, builders and project buyers
Project inquiry
Typically reply within 12–24 hours on business days.